E-Treat Water Conditioning System
A No-Salt Technology
Introducting the environmentally friendly solution to water quality improvement problems!
With E-Treat water conditioning systems, there is no salt, no backwash, no scale, no chlorine, and no electricity!
Step One (Main Tank): Water enters the system and flows down through a two cubic footbed of coconut shell activated carbon. This inital water treatment process improves water quality by reducing bad tastes, foul odors, chlorine, and organic substances through adsorpti0on.
Step Two (Inner Tank and Contact Chamber): During this process, water flows upward through the riser tube into the inner tank where treatment for scale prevention is provided using our highly effective anti-scale media. This transforms calcium ions into calcium crystals, which do not attach to pipes, surfaces, hardware, or heat exchanger components. The crystals are so small that they are easily rinsed away by the water flow!
With this system, there is no scale on plumbing fixtures, no costly repairs to hot water heaters from scale, no salt, no brine tank, and no electrical control valve. The installation is easy because only a simple “in and out” valve is required.
The anti-scale media virtually eliminates new scale formation and aids in the removal of existing scale. Results may vary, however, and performance is based on water hardness levels, flow rate, and other factors.
Calcium scale in pipes and plumbing equipment results in high energy costs and may lead to expensive repairs to appliances, such as hot water heaters, ice machines, coffee makers, and dishwashers. Scale can also be a source for bacteria to grow, which may become a health concern in drinking water applications.
On the other hand, calcium is important to human health, and supplements are recommended if calcium is reduced or totally void in one’s diet.
Installation of the E-Treat Conditioner
E-Treat Water Conditioning Systems are typically installed where water enters the house for whole house water treatment. Pipe connections are one inch.
E-Treat water conditioning systems are designed to proved water conditioning for your whole house for up to five years, baxsed on hardness and chlorine levels before the anti-scale media must be replaced. We recommend replacement of the activated carbon every two years. Extraction tools are available for both of these replacements. Our trained water quality improvement team can complete the media and carbon replacement procedure.
|Maximum Flow Rate||12 Gallons per Minute|
|Maximum Temperature||140° F (60° C)|
|Minimum Temperature||40° F (4° C)|
|Maximum Hardness||Sizing is based on maximum hardness of 25 grains per gallon|
|pH Range||6 to 9|
|Tank Sizes||Outer tank is 13″x65″. Inner tank is 9″x30″. (Outer tank is black.)|
|Flow Pattern||In the outer tank the flow is downward. In the inner tank the flow is upward.|
|Certification||ScaleNet media is NSF Standard 61 Certified for material safety.|
|Capacity||system comes with 2 cu. ft. of coconut shell carbon and 4 liters of ScaleNet.|