|
Introducting the environmentally friendly solution to water quality improvement problems!
With E-Treat water conditioning systems, there is no salt, no backwash, no scale, no chlorine, and no electricity!
-Here is how it works!-
Step One (Main Tank): Water
enters the system and flows down through a two cubic footbed of coconut
shell activated carbon. This inital water treatment process improves
water quality by reducing bad tastes, foul odors, chlorine, and organic
substances through adsorpti0on.
Step Two (Inner Tank and Contact Chamber): During
this process, water flows upward through the riser tube into the inner
tank where treatment for scale prevention is provided using our
highly effective anti-scale media. This transforms calcium ions into
calcium crystals, which do not attach to pipes, surfaces, hardware, or
heat exchanger components. The crystals are so small that they are
easily rinsed away by the water flow!
With
this system, there is no scale on plumbing fixtures, no costly repairs
to hot water heaters from scale, no salt, no brine tank, and no
electrical control valve. The installation is easy because only a
simple "in and out" valve is required.
The
anti-scale media virtually eliminates new scale formation and aids in
the removal of existing scale. Results may vary, however, and
performance is based on water hardness levels, flow rate, and other
factors.
__________________________________________________________
Calcium Information
Calcium scale in pipes and plumbing equipment results in high energy
costs and may lead to expensive repairs to appliances, such as hot
water heaters, ice machines, coffee makers, and dishwashers. Scale can
also be a source for bacteria to grow, which may become a health
concern in drinking water applications.
On the other hand, calcium is important to human health, and
supplements are recommended if calcium is reduced or totally void in
one's diet.
__________________________________________________________
Installation of the E-Treat Conditioner
E-Treat Water Conditioning Systems are typically installed where water
enters the house for whole house water treatment. Pipe connections are
one inch.
E-Treat water conditioning systems are designed to proved water
conditioning for your whole house for up to five years, baxsed on
hardness and chlorine levels before the anti-scale media must be
replaced. We recommend replacement of the activated carbon every two
years. Extraction tools are available for both of these replacements.
Our trained water quality improvement team can complete the media and
carbon replacement procedure.
Specifications
Maximum Flow Rate
|
12 Gallons per Minute
|
Maximum Temperature
|
140° F (60° C)
|
Minimum Temperature
|
40° F (4° C)
|
Maximum Hardness
|
Sizing is based on maximum hardness of 25 grains per gallon
|
pH Range
|
6 to 9
|
Tank Sizes
|
Outer tank is 13"x65". Inner tank is 9"x30". (Outer tank is black.)
|
Flow Pattern
|
In the outer tank the flow is downward. In the inner tank the flow is upward.
|
Certification
|
ScaleNet media is NSF Standard 61 Certified for material safety.
|
By-Pass Valve
|
Included
|
Capacity
|
system comes with 2 cu. ft. of coconut shell carbon and 4 liters of ScaleNet.
|
|
